Vol 2 No 4 (2010): Mechanics, material science, industrial engineering and management
Published: 2010-08-31
Article
Investigation into the quality of thermally treated package lamination
Abstract 436 | PDF Downloads 312 | DOI https://doi.org/10.3846/mla.2010.058
Page 5-9
Investigation into delamination
Abstract 433 | PDF Downloads 290 | DOI https://doi.org/10.3846/mla.2010.059
Page 10-12
Research on transfering the dynamic process by the spring
Abstract 471 | PDF Downloads 279 | DOI https://doi.org/10.3846/mla.2010.060
Page 13-17
The influence of formulating a damping solution on dot gain
Abstract 456 | PDF Downloads 280 | DOI https://doi.org/10.3846/mla.2010.061
Page 18-23
Adhesive analysis of painted coatings
Abstract 475 | PDF Downloads 712 | DOI https://doi.org/10.3846/mla.2010.062
Page 24-27
The methodology for calculating book backbones
Abstract 444 | PDF Downloads 494 | DOI https://doi.org/10.3846/mla.2010.063
Page 28-30
Research on the influence of orthopaedic inserts on pressure distribution in the foot
Abstract 475 | PDF Downloads 543 | DOI https://doi.org/10.3846/mla.2010.064
Page 31-34
Research of human postural balance parameters
Abstract 458 | PDF Downloads 731 | DOI https://doi.org/10.3846/mla.2010.065
Page 35-38
About the possibility of using ultrasound in thermal spray technologies
Abstract 417 | PDF Downloads 325 | DOI https://doi.org/10.3846/mla.2010.066
Page 39-41
Research on the efficiency of side exhausters
Abstract 430 | PDF Downloads 320 | DOI https://doi.org/10.3846/mla.2010.067
Page 42-45
Review of devices for measuring angles and prospects for development
Abstract 429 | PDF Downloads 421 | DOI https://doi.org/10.3846/mla.2010.068
Page 46-49
Research on the efficiency of drinking water aeration systems
Abstract 490 | PDF Downloads 290 | DOI https://doi.org/10.3846/mla.2010.069
Page 50-52
The impact of the welded joints made of X8CrNiTi18–10 stainless steel on the reliability estimation of pipes
Abstract 489 | PDF Downloads 317 | DOI https://doi.org/10.3846/mla.2010.070
Page 53-58
Sorting plastic waste in hydrocyclone
Abstract 568 | PDF Downloads 350 | DOI https://doi.org/10.3846/mla.2010.071
Page 59-61
Protection of intellectual property in pharmaceutical industry
Abstract 522 | PDF Downloads 334 | DOI https://doi.org/10.3846/mla.2010.072
Page 62-64
The research of influence of vibromechanical treatment on ni coatings PT-19N-01 adhesion
Abstract 455 | PDF Downloads 251 | DOI https://doi.org/10.3846/mla.2010.073
Page 65-68
Methods of forecasting in foreign exchange market
Abstract 540 | PDF Downloads 492 | DOI https://doi.org/10.3846/mla.2010.074
Page 69-72
Research on the mechanical properties of the weld seams of constructional steel using vibration energy method during welding
Abstract 503 | PDF Downloads 594 | DOI https://doi.org/10.3846/mla.2010.075
Page 73-76
Methodical aspects of creativity stimulation for the purposes of innovation development
Abstract 494 | PDF Downloads 963 | DOI https://doi.org/10.3846/mla.2010.076
Page 77-82
Research on cutting the plasma of aluminium alloys
Abstract 498 | PDF Downloads 360 | DOI https://doi.org/10.3846/mla.2010.077
Page 83-87
The influence of feed rate on surface roughness of TIC–WC carbide and Al2O3 ceramics SAWN-OFF with inner edge of diamond disc
Abstract 470 | PDF Downloads 282 | DOI https://doi.org/10.3846/mla.2010.078
Page 88-90
Research of defects in spur gear
Abstract 415 | PDF Downloads 376 | DOI https://doi.org/10.3846/mla.2010.079
Page 91-94
Research on the time-dependent adaptation of arterial blood pressure considering load value
Abstract 421 | PDF Downloads 339 | DOI https://doi.org/10.3846/mla.2010.080
Page 95-97
A case study on improving the process of decision making in industrial companies
Abstract 524 | PDF Downloads 539 | DOI https://doi.org/10.3846/mla.2010.081
Page 98-102
Typical lexical and syntactical mistakes in technical treatises
Abstract 439 | PDF Downloads 6363 | DOI https://doi.org/10.3846/mla.2010.082
Page 103-106